Below details some of the custom options available through Blade Custom Fitting. Please contact Blade Golf for ordering information, current pricing and lead times.
Custom Grind Options
  • Square or rounded toe
Custom finish Options
  • High gloss or satin finish
Custom Lengths Options
  • Irons (steel) - 1" short to 2" long. Some shaft types may require butt extensions if more than 1.5" long. (Excludes Dynamic Gold, Dynamic Gold Lite, Dynalite Gold and Tri-Gold, either with or without SensiCore.)
  • Irons (graphite) - 1" short to 2" long for most graphite shafts. Other parameters may exist for other shaft types.
Custom Loft and Lie Angle Options
  • Loft Angle - Maximum adjustment is +/- 2° from standard specifications
  • Lie Angle - Maximum adjustment is +/- 4° from standard specifications
Swingweight Ranges - TF-1s
    Length Swingweight
  • 1.00" short
  • .50" short
  • Standard
  • .50" long
  • 1.00" long
  • 1.50" long
 Up to D0
Up to D3
Up to D6
Up to D9
Up to E2
Up to E5
*Other models may vary. Standard ranges are based on using stock shafts and standard sized grips. Other shaft types and/or grip sizes can affect swingweight in various ways. Please contact us with questions.

 
Custom Grip Options
Blade Golf Grips Golf Pride Royal Avon Lamkin
Tour Velvet RoundTour WrapRoyal Perforated WrapBlack ChamoisCrossline (white fill)
 Reverse WrapBarber Pole (Sand Wrap)Brown ChamoisCrossline Cord
 Players' WrapSand Max Leather (black)*
 Tour VelvetSlotline  
 Tour Velvet Wrap
  
 Tour Velvet Cord   
 Classic Cord   
 Green Victory   
 Victory Half Cord   
 Victory Velvet (Full) Cord   
 Velvet Victory   

*Most grip types are available either round or ribbed (i.e. with reminder). Please specify when ordering and remember some grips may cause a delay in delivery based on availability.

Custom Grip Size Options
The standard Blade Golf grip for us is a .58 grip on a .600 shaft. Sizing is based on our own standard.
1/16 under.62 grip on .600 shaft
1/32 under.60 grip on .600 shaft
1/64 under.60 grip on .600 shaft + 1 wrap grip tape
Standard.58 grip on .600 shaft
1/64 over.58 grip on .600 shaft + 1 wrap grip tape
1/32 over.58 grip on .600 shaft + 1 wrap cloth tape or .56 grip on .600 shaft
1/16 over.58 grip on .600 shaft + 2 wraps cloth tape or .56 grip on .600 shaft + 1 wrap cloth tape
1/8 over.58 grip on .600 shaft + 3 wraps cloth tape or .56 grip on .600 shaft + 2 wrap cloth tape
* Not all grip types are available in all sizes.